Notes to users

1.  Do not immerse or rinse the main unit base in water. Do not place it in an oven. Please wipe it clean with a dry cloth.

2.  During the electrolysis process inside the electric cup, do not place any conductive substances inside for electrolysis. Otherwise, damage may occur due to over-current electrolysis.

3.  Suitable Water Source: The water quality must meet the "Sanitary Standard for Drinking Water." It is recommended to use purified water or household drinking water at room temperature below 50°C (122°F). Do not pour in any beverages such as juice, tea, milk, or soda, as this will damage the electrolysis chamber.

4.  Before first use, please charge the product with the appropriate power adapter until the green power indicator light turns on, indicating that charging is complete. (It is recommended not to use the product while charging).

5.  When using this product, you must open the protective cover of the electrolysis chamber on the cup base before operation.

6.  When using this product, place it on a stable, flat surface to prevent it from falling and breaking.

7.  When using this product, keep it away from fire sources.

8.  When using this product, it is not recommended to consume it together with medication.

9.  Recommendation: Please drink the hydrogen water immediately after generation is complete, as the hydrogen dissolved in the water will decrease over time, and the hydrogen concentration will gradually diminish.

10. It is recommended to rinse the bottle body with clean water before use, and then proceed with hydrogen generation.

11. It is normal for the battery capacity to gradually decrease with the frequency of use.

12. The product's upper lid is designed with a pressure relief mechanism and is not absolutely sealed. During use, do not place it sideways or upside down to avoid water leakage.

13. When generating hydrogen water, do not fill the bottle too full (recommended 80% full). It is advised to generate only one batch per use (five or ten minutes). Continuous generation may cause internal pressure buildup, leading to overload or potential water seepage due to excessive pressure.

14. When detaching and reattaching the bottle body to the base, ensure it is screwed on tightly. If not tightened properly, internal pressure may cause water leakage, potentially leading to short circuits or malfunctions in the internal circuit board due to moisture.

15. Do not disassemble this product on your own.

16. The small vent plug on the product's upper lid is a movable accessory. Before drinking, please check that it has not come loose to avoid accidental swallowing. For safety reasons, do not allow children to use this product.