English Translation
Special Instructions
This hydrogen water generator differs from typical commercial models. It features hydrogen gas separation via electrolysis. If unused for extended periods, soak the electrolysis chamber in purified water to prevent the protective membrane from drying out and temporarily losing function.
It is recommended to use the ozone generation function at least once a week (press and hold the button, and refer to the product instructions for ozone generation). The main purpose of ozone generation is to maintain the electrolysis chamber and activate the electrode mechanism at the bottle base, preventing reduced electrolysis efficiency due to inactivity.
Product Installation Instructions
● First-time use:
Before use, separate part ② (bottle body) from part ④ (base). Remove part ③ (electrolysis plate cover), then reinstall it to begin normal operation.
Diagram labels:
① Top cover
② Bottle body
③ Electrolysis plate cover
④ Main base
● Mineral Water Bottle Installation:
Attach part ⑤ (mineral water adapter) to part ④ (main base).
Open the mineral water bottle cap and ensure the water level is not too full—recommended 80% full to avoid overexpansion from hydrogen gas during generation.
Invert the base and screw it onto the bottle mouth at an angle. Ensure no leakage, then turn upright to begin generation.
After generation, invert the unit again before unscrewing the adapter to drink.
Diagram labels:
④ Main base
⑤ Mineral water bottle adapter
Water level line (approx. 70% full)